Toyota Tundra Wiper Blades Size Guide
The Toyota Tundra is a full size pickup truck built by Toyota primarily for the North American market, brought into Australia through remanufacturing and specialist import channels. The Tundra (2007-2025) takes a 26 inch (650mm) blade on the driver side and a 22 inch (550mm) blade on the passenger side. Front wipers use a hook-style connector, and the model does not have a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2007 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2008 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2009 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2010 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2011 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2012 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2013 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2014 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2015 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2016 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2017 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2018 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2019 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2020 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2021 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2022 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2023 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2024 | 26" (650mm) | 22" (550mm) | Buy Now |
| 2025 | 26" (650mm) | 22" (550mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota Tundra take?
The Toyota Tundra (2007 to 2025) takes a 26 inch (650mm) blade on the driver side and a 22 inch (550mm) blade on the passenger side. This size applies across the full model range covered here. Always confirm the size against the specific vehicle before ordering.
Does the Toyota Tundra have a rear wiper?
No, the Toyota Tundra does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page. Only the front driver and passenger blades need to be replaced.
What wiper connector does the Toyota Tundra use?
The Toyota Tundra uses a hook style connector on the front wipers, sometimes referred to as a J-Hook fitting. This is a widely used connector type that does not require special adaptors. Confirming the connector before ordering helps ensure a straightforward installation.
Why is the Toyota Tundra sold in Australia through remanufacturing?
The Toyota Tundra is built in left hand drive for the North American market and is not sold new in Australia, so vehicles here are typically remanufactured to right hand drive by specialist companies. This process does not change the wiper arm fitting or blade size, which remain the same as the US specification vehicle. Owners should still confirm their exact model year before ordering replacement blades.
How often should I replace Toyota Tundra wiper blades?
Toyota recommends replacing wiper blades every 6 to 12 months, depending on driving conditions and exposure to sunlight. Large vehicles like the Tundra often cover long distances on the highway, which can accelerate wear on the wiper rubber. Regular inspection helps maintain clear visibility in wet weather.
Browse all Toyota Tundra wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
