Toyota Sera Wiper Blades Size Guide
The Toyota Sera is a subcompact coupe distinguished by its butterfly style gullwing doors and full glass canopy roof, produced mainly for the Japanese domestic market. The Sera (EXY10, 1990-1995) takes a 21 inch (525mm) blade on both the driver and passenger sides. Front wipers use a J-Hook connector, and the model does not have a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1990 | 21" (525mm) | 21" (525mm) | Buy Now |
| 1991 | 21" (525mm) | 21" (525mm) | Buy Now |
| 1992 | 21" (525mm) | 21" (525mm) | Buy Now |
| 1993 | 21" (525mm) | 21" (525mm) | Buy Now |
| 1994 | 21" (525mm) | 21" (525mm) | Buy Now |
| 1995 | 21" (525mm) | 21" (525mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota Sera take?
The Toyota Sera (EXY10) takes a matching 21 inch (525mm) wiper blade on both the driver and passenger sides. This sizing applies across the full 1990 to 1995 production run. Confirming the build details helps ensure an exact fitment.
Does the Toyota Sera have a rear wiper?
No, the Toyota Sera does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page. Its compact rear glass and low set canopy design likely made a rear wiper unnecessary at the time.
What wiper connector does the Toyota Sera use?
The Toyota Sera uses a J-Hook connector on both front wiper arms. This is a widely used fitting across Toyota's range from this era. No additional adaptor is required for the correct fitment.
Why does the Toyota Sera use the same size on both sides?
The Toyota Sera is unusual in fitting identical 21 inch blades on both the driver and passenger sides, unlike most vehicles where the driver blade is noticeably longer. This symmetrical sizing suits the Sera's distinctive glass canopy roof and rounded windscreen. Owners can order a single size for both positions without needing to check left and right separately.
How often should I replace Toyota Sera wiper blades?
Toyota recommends replacing wiper blades every 6 to 12 months, or sooner if streaking or noise develops during use. Given the age of most Sera vehicles still on the road, more frequent checks are worthwhile. Regular replacement helps maintain clear visibility through the Sera's expansive glass canopy.
Browse all Toyota Sera wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
