Toyota Kluger Wiper Blades Size Guide
The Toyota Kluger is a mid size SUV built by Toyota, sitting above the RAV4 in the brand's SUV lineup and sold with three row seating in most generations. The Kluger takes a 26 inch (650mm) blade on the driver side across most generations, with the passenger side varying between 18 inch (450mm) and 20 inch (500mm) depending on series. Front wipers use a standard hook style connector across all generations, and the model is fitted with a rear wiper as standard. Find your vehicle year in the table below.
SUV (XU20)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2003 | 21" (525mm) | 19" (475mm) | Buy Now |
| 2004 | 21" (525mm) | 19" (475mm) | Buy Now |
| 2005 | 21" (525mm) | 19" (475mm) | Buy Now |
| 2006 | 21" (525mm) | 19" (475mm) | Buy Now |
SUV (XU40)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2007 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2008 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2009 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2010 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2011 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2012 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2013 | 26" (650mm) | 20" (500mm) | Buy Now |
SUV (XU50)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2014 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2015 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2016 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2017 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2018 | 26" (650mm) | 20" (500mm) | Buy Now |
| 2019 | 26" (650mm) | 20" (500mm) | Buy Now |
SUV (XU70)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2021 | 26" (650mm) | 18" (450mm) | Buy Now |
| 2022 | 26" (650mm) | 18" (450mm) | Buy Now |
| 2023 | 26" (650mm) | 18" (450mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Toyota Kluger take?
Wiper blade sizes vary by Kluger generation. The XU20 (2003-2007) takes 21 inch (525mm) driver and 19 inch (475mm) passenger blades, while the XU40 (2007-2013) and XU50 (2014-2019) take 26 inch (650mm) driver blades with 20 inch (500mm) passenger blades. The XU70 (2021-2023) takes a 26 inch (650mm) driver blade paired with an 18 inch (450mm) passenger blade.
Does the Toyota Kluger have a rear wiper?
Yes, all four generations of the Toyota Kluger are fitted with a rear wiper blade as standard. The rear blade is 12 inch (300mm) across the XU20, XU40, XU50 and XU70 series, and is sold separately from the front pair.
What wiper connector does the Toyota Kluger use?
The Toyota Kluger uses a standard hook style connector on the front wiper blades across all four generations. This consistency means the connector type has not changed since the model's introduction in 2003.
Why did the wiper blade sizes change between Kluger generations?
Wiper blade sizes on the Toyota Kluger changed as the windscreen dimensions were updated with each new body style, from the compact XU20 through to the larger XU40 and XU50. Owners should always match their blades to the specific series and year shown in the table above rather than assuming sizes carry over.
How often should I replace Toyota Kluger wiper blades?
Wiper blades on the Toyota Kluger should generally be replaced every 12 months, or sooner if streaking, skipping or noise appears. Australia's harsh UV exposure can accelerate rubber degradation, so more frequent checks are recommended in summer.
Browse all Toyota Kluger wiper blades, return to the Toyota wiper blades page, or visit our wiper blades size guide for all makes and models.
