Rover 2000 / 3500 Wiper Blades Size Guide

The Rover 2000 / 3500 is a British executive sedan built by Rover as part of the P6 range, offered with either four cylinder or V8 power depending on badge and variant. The 2000 / 3500 (P6, 1964-1978) takes a 14 inch (350mm) blade on the driver side and a 14 inch (350mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model is not fitted with a rear wiper. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Rover 2000 / 3500 take?

The Rover 2000 / 3500 (P6) takes a 14 inch (350mm) blade on both the driver and passenger sides across the full 1964 to 1978 production run. Owners should always confirm the exact year against the table on this page before ordering.

Does the Rover 2000 / 3500 have a rear wiper?

No, the Rover 2000 / 3500 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Rover 2000 / 3500 use?

The Rover 2000 / 3500 uses a J-Hook connector on both front wiper arms. This is a common fitting for classic Rover saloons of the P6 generation and suits most standard replacement blades.

Why does Wiper Blades Direct list two separate products for the 2000 / 3500 P6?

Wiper Blades Direct lists a 1964 to 1976 product and a separate 1977 to 1978 product because the P6 range was updated late in its production run. Selecting the correct year on this page ensures the right blade is added to the cart.

How often should I replace Rover 2000 / 3500 wiper blades?

Wiper blades on a Rover 2000 / 3500 should generally be replaced every 12 months, or sooner if streaking, skipping or noise becomes noticeable. Blades on a classic vehicle used infrequently can still perish over time even with low mileage.

Browse all Rover 2000 / 3500 wiper blades, return to the Rover wiper blades page, or visit our wiper blades size guide for all makes and models.