Mitsubishi Outlander Wiper Blades Size Guide

The Mitsubishi Outlander is a mid-size SUV positioned above the ASX in the Mitsubishi lineup, offered across four generations since its introduction. The current Outlander most commonly takes a 26 inch (650mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side, though earlier ZE, ZF, ZG and ZH generations use smaller front blades as shown in the table below. Front wipers use a J-Hook connector across all generations, and every Outlander generation is fitted with a rear wiper as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Mitsubishi Outlander take?

Wiper blade sizes for the Outlander vary by generation. The ZE and ZF series uses a 22 inch (550mm) driver blade and a 19 inch (475mm) passenger blade, the ZG and ZH series steps up to a 24 inch (600mm) driver blade and a 20 inch (500mm) passenger blade, and the ZJ, ZK, ZL and ZM series uses a 26 inch (650mm) driver blade with an 18 inch (450mm) passenger blade. The table above lists the correct size for each build year.

Does the Mitsubishi Outlander have a rear wiper?

Yes, every generation of the Outlander is fitted with a rear wiper blade as standard. The ZE and ZF series uses a 14 inch (350mm) rear blade, while the ZG, ZH, ZJ, ZK, ZL and ZM generations use a smaller 12 inch (300mm) rear blade, sold separately from the front pair.

What wiper connector does the Mitsubishi Outlander use?

The Mitsubishi Outlander uses a J-Hook adaptor on the front wiper arms across every generation from the ZE series through to the current ZM series. This consistent connector type makes selecting a replacement straightforward.

Why did the Outlander's rear wiper get smaller in later models?

Mitsubishi reduced the rear wiper size from 14 inches to 12 inches when the third generation Outlander was introduced, reflecting a redesigned rear window and wiper arm geometry. The smaller rear blade is correct for these later models and should not be confused with a worn or incorrect part.

How often should I replace Mitsubishi Outlander wiper blades?

Wiper blades on the Outlander typically need replacing around every 12 months under normal Australian conditions. Owners who drive frequently in harsh sun or heavy rain may need to replace them sooner to maintain a clear, streak free wipe.

Browse all Mitsubishi Outlander wiper blades, return to the Mitsubishi wiper blades page, or visit our wiper blades size guide for all makes and models.