Mitsubishi 3000GT Wiper Blades Size Guide
The Mitsubishi 3000GT is a sports coupe built on the same platform as the Dodge Stealth, and was one of the most powerful models Mitsubishi offered during the 1990s. The 3000GT (1992-1997) takes a 21 inch (525mm) blade on the driver side and a 20 inch (500mm) blade on the passenger side. Front wipers use a hook-style connector, and the model is fitted with a rear wiper as standard. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1992 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1993 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1994 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1995 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1996 | 21" (525mm) | 20" (500mm) | Buy Now |
| 1997 | 21" (525mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Mitsubishi 3000GT take?
The Mitsubishi 3000GT (1992-1997) takes a 21 inch (525mm) wiper blade on the driver side and a 20 inch (500mm) blade on the passenger side. Both blades use a hook-style connector and are sold as a matched front pair.
Does the Mitsubishi 3000GT have a rear wiper?
Yes, the Mitsubishi 3000GT is fitted with a rear wiper blade as standard. The rear blade measures 20 inches (500mm) and is sold separately from the front pair. Owners should replace all three blades at the same time for consistent visibility.
What wiper connector does the Mitsubishi 3000GT use?
The Mitsubishi 3000GT uses a hook-style connector on its front wiper blades. This connector type is common across Mitsubishi models from this era and allows for straightforward installation without tools.
Will Dodge Stealth wiper blades fit a Mitsubishi 3000GT?
Yes, since the Mitsubishi 3000GT and Dodge Stealth share the same body and windscreen glass, the wiper blade sizes and connector type are identical between the two models. Buyers sourcing parts for either badge can use the same blade listing with confidence.
How often should I replace Mitsubishi 3000GT wiper blades?
Wiper blades on a Mitsubishi 3000GT should generally be replaced every 12 months, or sooner if streaking, juddering or noise becomes noticeable. Australian sun and heat tend to harden rubber faster than in cooler climates, which shortens blade life.
Browse all Mitsubishi 3000GT wiper blades, return to the Mitsubishi wiper blades page, or visit our wiper blades size guide for all makes and models.
