HSV SV99 Wiper Blades Size Guide

The HSV SV99 is a limited edition Holden Special Vehicles performance sedan based on the Holden Commodore VT platform, named for its model year. The SV99 (VT, 1999-1999) takes a 22" (550mm) blade on the driver side and a 20" (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model is not fitted with a rear wiper. Find your vehicle year in the table below.

Year	Driver Side	Passenger Side	Buy and Save 50% Off RRP
1999	22" (550mm)	20" (500mm)	Buy Now

Frequently Asked Questions

What size wiper blades does a HSV SV99 take?

A HSV SV99 (1999-1999) takes a 22" (550mm) wiper blade on the driver side and a 20" (500mm) wiper blade on the passenger side. These sizes can be confirmed in the specifications table on the product page.

Does the HSV SV99 have a rear wiper?

No, the HSV SV99 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the HSV SV99 use?

The HSV SV99 uses a J-Hook style front wiper connector. This connector type is pre assembled on the replacement blades, so no separate adaptor purchase is required.

Does the HSV SV99 use the same wipers as a standard VT Commodore?

The HSV SV99 shares its windscreen and wiper mounting points with the standard Holden Commodore VT sedan of the same period, so the blade sizes and connector type are identical between the two versions. This is consistent with most VT based HSV models from this generation.

How often should I replace HSV SV99 wiper blades?

Wiper blades on a HSV SV99 should generally be replaced every 6 to 12 months, or sooner if streaking, skipping or noise becomes noticeable. Driving conditions and exposure to sun and harsh Australian weather can shorten the usable life of the rubber, so a visual check before winter is recommended.

Browse all HSV SV99 wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.