HSV SV6000 Wiper Blades Size Guide
The HSV SV6000 is a limited edition Holden Special Vehicles performance sedan based on the Holden Commodore VZ platform, named for its 6.0 litre V8 engine. The SV6000 (VZ, 2005-2005) takes a 22" (550mm) blade on the driver side and a 20" (500mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model is not fitted with a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2005 | 22" (550mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a HSV SV6000 take?
A HSV SV6000 (2005-2005) takes a 22" (550mm) wiper blade on the driver side and a 20" (500mm) wiper blade on the passenger side. These sizes can be confirmed in the specifications table on the product page.
Does the HSV SV6000 have a rear wiper?
No, the HSV SV6000 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the HSV SV6000 use?
The HSV SV6000 uses a J-Hook style front wiper connector. This connector type is pre assembled on the replacement blades, so no separate adaptor purchase is required.
How many HSV SV6000 models were produced?
The HSV SV6000 was produced in a limited run during a single model year as part of the VZ based HSV lineup. Despite its limited production, it shares the same wiper blade sizing and connector type as other VZ based Commodore and HSV sedans.
How often should I replace HSV SV6000 wiper blades?
Wiper blades on a HSV SV6000 should generally be replaced every 6 to 12 months, or sooner if streaking, skipping or noise becomes noticeable. Driving conditions and exposure to sun and harsh Australian weather can shorten the usable life of the rubber, so a visual check before winter is recommended.
Browse all HSV SV6000 wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.
