HSV Senator Wiper Blades Size Guide

The HSV Senator is a performance luxury sedan produced by Holden Special Vehicles, combining HSV performance upgrades with a higher-specification interior. The Senator (1992-2017) wiper blade sizes vary by series and body type; refer to the tables below for the correct sizes for your vehicle. The connector type used on the front wipers varies by series, ranging from J-Hook on earlier models to Pinch Tab on later VE and VF platform variants. Sedan variants do not have a rear wiper blade. Find your vehicle year in the table below.

Sedan (E Series)

Sedan (VF)

Sedan (VT VX)

Sedan (VY VZ)

Sedan (VR VS)

Sedan (VP)

Frequently Asked Questions

What size wiper blades does an HSV Senator take?

The HSV Senator wiper blade sizes vary by series. Earlier models from the VR/VS era take 20 inch (500mm) blades on both sides, VT/VX and VY/VZ variants take a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade, and E Series and GEN-F/VF variants take a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. Check the table above for the correct sizes for your year.

Does the HSV Senator have a rear wiper?

No, the HSV Senator does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the HSV Senator use?

The connector type depends on the series. VR, VS, VT, VX, VY, and VZ series HSV Senator models use a J-Hook connector on the front wipers. E Series models built on the VE Commodore platform, and GEN-F, GEN-F2, and VF models built on the VF Commodore platform, use a Pinch Tab connector. Using the correct connector ensures the blades click securely into place during installation.

Is the HSV Senator wiper blade size the same as the HSV GTS?

Yes. The HSV Senator and HSV GTS share the same Holden Commodore platform within each generation, so the wiper blade sizes and connector types are identical for equivalent series. Both models use the same 26 inch driver and 15 inch passenger blades with a Pinch Tab connector on E Series and VF variants, and the same J-Hook sizes on earlier VT through VZ series.

How often should I replace HSV Senator wiper blades?

Wiper blades on an HSV Senator should generally be replaced every 12 months or sooner if the blades begin to streak, skip, or leave smears on the windscreen. In harsh Australian conditions, particularly in areas with intense UV exposure, blades may need replacing more frequently as the rubber deteriorates faster. Inspecting blades at each service interval is a practical way to stay ahead of any deterioration.

Browse all HSV Senator wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.