HSV Grange Wiper Blades Size Guide
The HSV Grange is a full-size performance luxury sedan produced by Holden Special Vehicles, based on the Holden Caprice/Statesman platform and spanning four series from the VS to GEN-F2 generations. Wiper blade sizes vary by series: GEN-F GEN-F2 and WM models (2006-2017) take a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade, while WH WK WL models (1999-2006) take a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade, and VS models (1996-1999) take matching 20 inch (500mm) blades on both sides. GEN-F GEN-F2 and WM series use a Pinch Tab connector, while WH WK WL and VS series use a J-Hook connector; no HSV Grange series is fitted with a rear wiper. Find your vehicle year in the table below.
Sedan (GEN-F GEN-F2)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2013 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2014 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2015 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2016 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2017 | 26" (650mm) | 15" (375mm) | Buy Now |
Sedan (WM)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2006 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2007 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2008 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2009 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2010 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2011 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2012 | 26" (650mm) | 15" (375mm) | Buy Now |
| 2013 | 26" (650mm) | 15" (375mm) | Buy Now |
Sedan (WH WK WL)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1999 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2000 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2001 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2002 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2003 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2004 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2005 | 22" (550mm) | 20" (500mm) | Buy Now |
| 2006 | 22" (550mm) | 20" (500mm) | Buy Now |
Sedan (VS)
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 1996 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1997 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1998 | 20" (500mm) | 20" (500mm) | Buy Now |
| 1999 | 20" (500mm) | 20" (500mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does an HSV Grange take?
HSV Grange wiper blade sizes depend on the series. GEN-F GEN-F2 and WM models (2006-2017) take a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. WH WK WL models (1999-2006) take a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade. VS models (1996-1999) take matching 20 inch (500mm) blades on both sides.
Does the HSV Grange have a rear wiper?
No, the HSV Grange does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the HSV Grange use?
HSV Grange connector type depends on the series. GEN-F GEN-F2 and WM models (2006-2017) use a Pinch Tab connector. WH WK WL and VS models (1996-2006) use a J-Hook connector. Selecting the correct series before ordering ensures the right adaptor is included.
Is the HSV Grange based on the same platform as the Holden Caprice?
Yes, the HSV Grange is based on the Holden Caprice platform across all generations. The WM and GEN-F Grange share their underpinnings with the WM and WN Caprice, which means wiper arm specifications are consistent between the two models within each generation.
How often should HSV Grange wiper blades be replaced?
HSV Grange wiper blades should be replaced every 12 months or sooner if streaking or chattering is noticed. The Australian climate accelerates rubber degradation due to UV exposure and heat, making annual checks important. Replacing both front blades at the same time ensures consistent wiper performance.
Browse all HSV Grange wiper blades, return to the HSV wiper blades page, or visit our wiper blades size guide for all makes and models.
