Holden Omega Wiper Blades Size Guide
The Holden Omega is the entry-level sedan variant of the VE Commodore, sitting below the Berlina in the VE lineup. The Omega (VE, 2006โ2013) takes a 26 inch (650mm) blade on the driver side and a 14 inch (350mm) blade on the passenger side. Front wipers use a Pinch Tab connector, and the Omega sedan is not fitted with a rear wiper. Find your vehicle year in the table below.
| Year | Driver Side | Passenger Side | Buy and Save 50% Off RRP |
| 2006 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2007 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2008 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2009 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2010 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2011 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2012 | 26" (650mm) | 14" (350mm) | Buy Now |
| 2013 | 26" (650mm) | 14" (350mm) | Buy Now |
Frequently Asked Questions
What size wiper blades does a Holden Omega take?
The Holden Omega (VE, 2006โ2013) takes a 26 inch (650mm) driver blade and a 14 inch (350mm) passenger blade. Note that the passenger blade on the Omega is shorter than on the Berlina and Calais VE variants, which use a 15 inch (375mm) passenger blade, so it is important to select the correct model when ordering.
Does the Holden Omega have a rear wiper?
No, the Holden Omega does not have a rear wiper blade. This model is a sedan and is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.
What wiper connector does the Holden Omega use?
The Holden Omega VE uses a Pinch Tab connector on the front wiper arms, which is standard across the VE Commodore platform regardless of trim level. Replacement blades purchased through this site include the Pinch Tab adaptor pre-fitted.
Is the Holden Omega passenger wiper blade the same size as the Commodore VE?
Not always. The Omega uses a 14 inch (350mm) passenger blade, which is one size shorter than the 15 inch (375mm) passenger blade used on Berlina and Calais VE models. Driver blade size is the same at 26 inches (650mm) across all VE variants. Always verify the passenger blade size by model rather than assuming it matches other VE trim levels.
How often should I replace Holden Omega wiper blades?
Holden Omega wiper blades should be replaced every 12 months, or sooner if streaking, juddering or reduced visibility is noticed. The VE Omega's large 26 inch driver blade covers a wide sweep area and benefits from being kept in good condition year-round. Australia's strong UV exposure and high summer temperatures speed up rubber degradation, making annual replacement important for optimal visibility.
Browse all Holden Omega wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.
