Holden Malibu Wiper Blades Size Guide

The Holden Malibu is a mid-size sedan produced by General Motors and sold in Australia under the Holden badge, based on the eighth generation Chevrolet Malibu built on the Epsilon II platform. The Malibu (EM, 2013-2016) takes a 24 inch (600mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Malibu take?

The Holden Malibu (EM, 2013-2016) takes a 24 inch (600mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side. The driver and passenger blades are different sizes, so it is important to order both correctly.

Does the Holden Malibu have a rear wiper?

No, the Holden Malibu does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Malibu use?

The Holden Malibu uses a J-Hook wiper connector on both front arms. This is a widely available connector type compatible with a broad range of replacement wiper blades.

What does the EM series code mean on the Holden Malibu?

EM is the Australian series code used to identify the Holden Malibu sold locally from 2013 to 2016. It corresponds to the eighth generation Chevrolet Malibu built on GM's Epsilon II front-wheel drive platform.

How often should I replace Holden Malibu wiper blades?

Wiper blades on the Holden Malibu should be replaced every 12 months or sooner if streaking, squeaking, or smearing is noticed. The 24 inch driver blade in particular covers a large sweep area, so any deterioration in blade condition will be noticeable quickly.

Browse all Holden Malibu wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.