Holden Frontera Wiper Blades Size Guide

The Holden Frontera is a mid-size SUV based on the Opel Frontera, produced by Isuzu and sold in Australia under the Holden badge across the M7 and MZ series. The Frontera (M7 MZ, 1999-2003) takes an 18 inch (450mm) blade on both the driver side and the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Frontera take?

The Holden Frontera (M7 MZ, 1999-2003) takes an 18 inch (450mm) blade on both the driver side and the passenger side. Both blades are the same size, making them easy to replace.

Does the Holden Frontera have a rear wiper?

No, the Holden Frontera does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Frontera use?

The Holden Frontera uses a J-Hook wiper connector on both front arms. This is a standard connector type available across a wide range of aftermarket replacement blades.

What does the M7 MZ series code mean on the Holden Frontera?

M7 and MZ are the Australian market series codes used to identify the two generations of the Holden Frontera sold locally. The M7 covers the earlier model, and MZ identifies the facelifted version sold from around 2001. Both share the same wiper blade specifications.

How often should I replace Holden Frontera wiper blades?

Wiper blades on the Holden Frontera should be replaced every 12 months or sooner if streaking, squeaking, or smearing is noticed. Given the age of these vehicles, regular blade checks are particularly important.

Browse all Holden Frontera wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.