Holden Cruze Wiper Blades Size Guide

The Holden Cruze is a compact car produced by General Motors and sold in Australia across two distinct generations: the YG series, a compact SUV produced by Daewoo, and the J series sedan, hatchback, and station wagon built on the global Chevrolet Cruze platform. Front wiper blade sizes vary by series: the YG SUV takes a 19 inch (475mm) driver blade and an 18 inch (450mm) passenger blade, while all J series variants take a 24 inch (600mm) driver blade with either an 18 inch (450mm) or 17 inch (425mm) passenger blade depending on the series. All Holden Cruze variants use a J-Hook connector on the front wiper blades, and rear wiper fitment depends on body style. Find your vehicle year in the table below.

SUV (YG)

SUV (YG2)

Sedan (JG)

Sedan (JH)

Hatchback (JH)

Station Wagon (JH)

Frequently Asked Questions

What size wiper blades does a Holden Cruze take?

Wiper blade sizes vary across Cruze generations. The YG series SUV (2002-2006) takes a 19 inch (475mm) driver blade and an 18 inch (450mm) passenger blade. The JG Sedan (2009-2011) takes a 24 inch (600mm) driver blade and an 18 inch (450mm) passenger blade. The JH series (2011-2016) takes a 24 inch (600mm) driver blade and a 17 inch (425mm) passenger blade across all body types.

Does the Holden Cruze have a rear wiper?

It depends on the body style. The YG series SUV is fitted with a 12 inch (300mm) rear wiper blade as standard. The JH Hatchback is also fitted with a rear wiper, sized at 14 inches (350mm). The JH Station Wagon has a rear wiper sized at 12 inches (300mm). The JG and JH Sedan variants do not have a rear wiper blade.

What wiper connector does the Holden Cruze use?

All Holden Cruze variants covered on this page use a J-Hook connector on the front wiper blades. This is one of the most common connector types in Australia and replacement blades with a J-Hook fitting are widely available.

Are the JH Sedan, Hatchback, and Station Wagon front wiper sizes the same?

Yes. All three JH body styles (Sedan, Hatchback, and Station Wagon) from 2011 to 2016 share the same front wiper blade sizes: 24 inches (600mm) on the driver side and 17 inches (425mm) on the passenger side. The rear wiper size differs between body types, so owners should check the correct variant when ordering a rear blade.

How often should I replace Holden Cruze wiper blades?

Wiper blades on a Holden Cruze should typically be replaced every 6 to 12 months. In Australian conditions, UV exposure, heat, and dust accelerate rubber degradation faster than in cooler climates. Owners should replace blades as soon as streaking, skipping, or smearing becomes noticeable, regardless of the time since last replacement.

Browse all Holden Cruze wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.