Holden Colorado 7 Wiper Blades Size Guide

The Holden Colorado 7 is a seven-seat SUV variant of the Colorado platform, produced by GM Korea and sold in Australia under the Holden brand. The Colorado 7 (RG, 2012-2016) takes a 22 inch (550mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side. Front wipers use a Small Button connector, and the model does not have a rear wiper blade. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Colorado 7 take?

The Holden Colorado 7 (RG, 2012-2016) takes a 22 inch (550mm) blade on the driver side and an 18 inch (450mm) blade on the passenger side. This fitment applies to all years of the single-generation Colorado 7.

Does the Holden Colorado 7 have a rear wiper?

No, the Holden Colorado 7 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Colorado 7 use?

The Holden Colorado 7 uses a Small Button connector on the front wiper arms. This connector type is also used on the Colorado Ute RG, as both share the same underpinnings and wiper arm design.

Is the Holden Colorado 7 the same platform as the Colorado Ute?

Yes, the Holden Colorado 7 is built on the same RG platform as the Colorado Ute (2012-2020). The two vehicles share the same wiper blade sizes (22 inch driver, 18 inch passenger) and the same Small Button connector type.

How often should I replace Holden Colorado 7 wiper blades?

Wiper blades on a Holden Colorado 7 should be replaced every 12 months or when streaking or reduced visibility is observed. Vehicles used in dusty or off-road conditions may need more frequent replacement due to increased contamination on the windscreen.

Browse all Holden Colorado 7 wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.