Holden Captiva 5 Wiper Blades Size Guide

The Holden Captiva 5 is the five-seat variant of the Holden Captiva range, produced by GM Korea and sold in Australia under the Holden brand. The Captiva 5 (2006-2022) takes a 24 inch (600mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side across all series. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade. Find your vehicle year in the table below.

SUV (CG)

SUV (CG II)

Frequently Asked Questions

What size wiper blades does a Holden Captiva 5 take?

The Holden Captiva 5 takes a 24 inch (600mm) blade on the driver side and a 16 inch (400mm) blade on the passenger side. This fitment is consistent across both the CG (2006-2011) and CG II (2011-2022) series.

Does the Holden Captiva 5 have a rear wiper?

No, the Holden Captiva 5 does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Captiva 5 use?

The Holden Captiva 5 uses a J-Hook connector on the front wiper arms. J-Hook is the most widely used connector type in Australia and installation requires no tools.

What is the difference between the Holden Captiva and Captiva 5?

The Holden Captiva 5 is the five-seat variant of the Captiva range, while the standard Captiva is a seven-seater. Both models share the same wiper blade sizes and connector type, so the fitment is identical across both body configurations.

How often should I replace Holden Captiva 5 wiper blades?

Wiper blades on a Holden Captiva 5 should be replaced every 12 months or when streaking, chattering, or reduced visibility is noticed. Australian UV exposure and heat can degrade rubber faster than in cooler climates, so a seasonal check is worthwhile.

Browse all Holden Captiva 5 wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.