Holden Caprice Wiper Blades Size Guide

The Holden Caprice is a full-size luxury sedan produced by Holden, positioned above the Statesman as the flagship in the Commodore-based luxury range. Wiper blade sizes vary by series: VQ, VR and VS models (1990–1999) use a 20 inch (500mm) blade on both the driver and passenger sides; WH, WK and WL models (1999–2006) use a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade; WM and WN models (2006–2017) use a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. VQ, VR and VS models use a J-Hook connector, WH, WK and WL models also use a J-Hook connector, and WM and WN models use a Pinch Tab connector. No Caprice variant is fitted with a rear wiper blade. Find your vehicle year in the table below.

Sedan (VQ VR VS)

Sedan (WH WK WL)

Sedan (WM WN)

Frequently Asked Questions

What size wiper blades does a Holden Caprice take?

The Holden Caprice wiper blade size depends on the series. VQ, VR and VS models (1990–1999) use matching 20 inch (500mm) blades on both sides. WH, WK and WL models (1999–2006) use a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade. WM and WN models (2006–2017) use a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade.

Does the Holden Caprice have a rear wiper?

No, the Holden Caprice does not have a rear wiper blade. This model is a sedan-only lineup and is fitted with two front wiper blades only, which can be confirmed in the specifications on the product pages.

What wiper connector does the Holden Caprice use?

VQ, VR and VS models (1990–1999) and WH, WK and WL models (1999–2006) use a J-Hook connector on the front wiper arms. WM and WN models (2006–2017) use a Pinch Tab connector, which is the same fitment used across the VE Commodore range built on the same platform. Blades purchased through this site include the correct adaptor pre-fitted.

What is the difference between the Holden Caprice and Statesman wiper sizes?

The Holden Caprice and Statesman share the same wiper blade sizes and connector types within each generation, as both models are built on the same body platform. The Statesman was discontinued after the WM series in 2010, while the Caprice continued through to the WN series ending in 2017. Owners of either model can use the same blade specifications for their respective series.

How often should I replace Holden Caprice wiper blades?

Holden Caprice wiper blades should be replaced every 12 months as a general guide, or earlier if streaking, skipping or smearing is noticed. Australia's intense UV and summer heat degrade wiper rubber faster than in temperate climates, making annual replacement a sound practice for vehicles parked outdoors. The large 26 inch driver blade on WM and WN models covers a wide sweep area, so maintaining its condition is particularly important for clear forward vision.

Browse all Holden Caprice wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.