Holden Calibra Wiper Blades Size Guide

The Holden Calibra is a two-door coupe based on the Opel Calibra, which was produced by German automaker Opel and sold in Australia under the Holden badge. The Calibra (YE, 1991-1997) takes an 18 inch (450mm) blade on both the driver side and the passenger side. Front wipers use a J-Hook connector, and the model does not have a rear wiper blade as standard. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Holden Calibra take?

The Holden Calibra (YE, 1991-1997) takes an 18 inch (450mm) blade on both the driver side and the passenger side. Both blades are the same size, which makes replacement straightforward.

Does the Holden Calibra have a rear wiper?

No, the Holden Calibra does not have a rear wiper blade. This coupe is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Holden Calibra use?

The Holden Calibra uses a J-Hook wiper connector on both front arms. This is a common connector type that suits a wide range of aftermarket and OEM-equivalent blades.

What is the Holden Calibra YE series code?

YE is the Australian series code used to identify the Holden Calibra sold locally from 1991 to 1997. It corresponds to the Opel Calibra A generation, which was built on the GM2900 platform shared with the Opel Vectra.

How often should I replace Holden Calibra wiper blades?

Wiper blades on the Holden Calibra should be replaced every 12 months or sooner if streaking, squeaking, or smearing occurs. Given the age of these vehicles, rubber compound degradation can happen faster than on newer cars.

Browse all Holden Calibra wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.