Holden Berlina Wiper Blades Size Guide

The Holden Berlina is a mid-range variant of the Holden Commodore, sitting between the base Commodore and the top-of-the-line Calais. Wiper blade sizes vary across the series: VT and VX models (2000–2002) use a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade, VY and VZ models (2002–2007) share the same 22 inch (550mm) and 20 inch (500mm) pairing, while VE models (2006–2013) use a larger 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. Front wipers on VT, VX, VY and VZ models use a J-Hook connector; VE models use a Pinch Tab connector. Station Wagon body types on the VT, VX, VY and VZ series are fitted with a rear wiper as standard; VE sedans and wagons do not have a rear wiper. Find your vehicle year in the table below.

Sedan (VT VX)

Station Wagon (VT VX)

Sedan (VY VZ)

Station Wagon (VY VZ)

Sedan (VE)

Station Wagon (VE)

Frequently Asked Questions

What size wiper blades does a Holden Berlina take?

The Holden Berlina wiper blade size depends on the series. VT and VX models (2000–2002) and VY and VZ models (2002–2007) both use a 22 inch (550mm) driver blade and a 20 inch (500mm) passenger blade. VE models (2006–2013) use a 26 inch (650mm) driver blade and a 15 inch (375mm) passenger blade. Sizes are listed by year in the tables above.

Does the Holden Berlina have a rear wiper?

It depends on the body type and series. Berlina Station Wagons on the VT, VX, VY and VZ series are fitted with a rear wiper blade as standard; the rear blade is 16 inches (400mm) and is sold separately from the front pair. Berlina Sedans across all series and VE Station Wagons do not have a rear wiper blade, confirmed in the specifications on the product pages.

What wiper connector does the Holden Berlina use?

Berlina models on the VT, VX, VY and VZ series use a J-Hook connector on the front wiper arms. VE series Berlina models use a Pinch Tab connector instead. Replacement blades purchased through this site come with the correct adaptor pre-fitted for each series.

Is the Holden Berlina based on the same platform as the Commodore?

Yes, the Berlina shares its body shell, wiper arms and fitment points with the Holden Commodore of the same series. This means wiper blade sizes and connector types are identical across the Commodore, Berlina, Calais and Senator variants produced in the same series year range. The tables above reflect the same specifications as the equivalent Commodore variant.

How often should I replace Holden Berlina wiper blades?

Holden Berlina wiper blades should be replaced every 12 months as a general guide, or sooner if streaking, skipping or squealing is noticed. Australia's UV levels and summer heat accelerate rubber deterioration faster than in milder climates, so annual replacement is particularly important for vehicles parked outdoors. Wagon owners should replace the rear blade at the same time as the front pair for consistent visibility.

Browse all Holden Berlina wiper blades, return to the Holden wiper blades page, or visit our wiper blades size guide for all makes and models.