Hino Wiper Blades Size Guide
Need new wiper blades for your Hino? Select your model below to find the correct driver, passenger and rear sizes.
Hino Size Guides by Model
| Hino 300 | Hino 500 | Hino Dutro |
How to choose the right wiper blades for your Hino
Before ordering new wiper blades for your Hino, it helps to check three things: the correct length for each side, the connector your wiper arms use, and whether a rear blade is needed. These quick steps cover each one.
- Pick your model from the list above and check the sizes listed for your build year.
- Take note of your body style and series, since different versions of one model can need different blade lengths.
- Look at the connector listed for your model, as the right connector lets the blades click straight onto the arms.
- Where a rear wiper is fitted, it pays to change the rear blade along with the front pair.
Hino Wiper Blade FAQs
How often should Hino wiper blades be replaced?
For a Hino in daily work use, replacing the wiper blades every 6 to 12 months keeps the windscreen clear. Long hours on the road, dust and constant sun exposure wear the rubber faster than on a typical private car.
Can I fit Hino wiper blades myself?
Yes, swapping the wiper blades on a Hino is a simple home job that needs no tools. Lift the arm, unclip the old blade and click the new one into place, which takes about 60 seconds with the easy-to-follow instructions included.
Should I replace both front wiper blades on my Hino at the same time?
Yes, it is best to replace the driver and passenger blades as a pair. Both blades age at about the same rate, and fitting them together keeps the whole windscreen clear rather than just one side.
Why are my Hino wiper blades streaking or chattering?
When blades streak or chatter, the rubber has usually hardened, split or collected a film of road grime. Wiping the blades and windscreen clean can restore performance for a while, but persistent streaks mean it is time for a new set.
Can I use a longer wiper blade than the listed size on my Hino?
The listed sizes are matched to the windscreen and wiper arms on your Hino, so it is best not to change them. An oversized blade can catch the edge of the windscreen or the other blade, and an undersized one leaves part of the glass uncleared.
How can I make my Hino wiper blades last longer?
A clean windscreen, plenty of washer fluid and the occasional wipe of the rubber edges will all extend blade life. Where possible, park out of direct sun, as heat and UV are the biggest causes of hardened, streaky blades.
Why do Hino models need specific wiper blades?
Hino is the Japanese truck maker known for its light and medium duty trucks, including the Dutro, 300 Series and 500 Series. Windscreen sizes and wiper arm designs vary across the Hino range, so the right blade length and connector depend on the model you drive. Following the size guide for your model and year ensures a proper fit and clear visibility.
If your model isn't listed or you would like help with sizing, contact our team and they will point you to the right blades for your Hino.
Browse every blade for your car on the Hino wiper blades page, or head back to our wiper blades size guide to check another make.
