Great Wall V200 Wiper Blades Size Guide

The Great Wall V200 (also sold as the GWM V200) is a dual-cab ute produced by Great Wall Motors and the successor to the V240, featuring a revised front end and updated specification. The V200 (2011-2014) takes a 22 inch (550mm) blade on the driver side and a 19 inch (475mm) blade on the passenger side. Front wipers use a J-Hook connector, and the V200 does not have a rear wiper blade. Find your vehicle year in the table below.

Frequently Asked Questions

What size wiper blades does a Great Wall V200 take?

The Great Wall V200 (GWM V200) uses a 22 inch (550mm) blade on the driver side and a 19 inch (475mm) blade on the passenger side. These sizes apply to the 2011 to 2014 model years sold in Australia.

Does the Great Wall V200 have a rear wiper?

No, the Great Wall V200 does not have a rear wiper blade. This ute is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Great Wall V200 use?

The Great Wall V200 uses a J-Hook connector on its front wiper arms. J-Hook is a widely used connector type and is included pre-assembled with replacement blades from Wiper Blades Direct.

How does the Great Wall V200 differ from the V240?

The Great Wall V200 replaced the V240 in 2011 and featured a refreshed exterior and interior, along with a more refined diesel engine option. Both models share the same front wiper blade sizes: 22 inch driver and 19 inch passenger, and both use a J-Hook connector.

How often should I replace Great Wall V200 wiper blades?

Great Wall V200 wiper blades should be replaced every 12 months or sooner if visible degradation such as streaking, skipping, or squealing occurs. Annual inspection is particularly important in Queensland and other high-UV regions where rubber deteriorates faster.

Browse all Great Wall V200 wiper blades, return to the Great Wall wiper blades page, or visit our wiper blades size guide for all makes and models.