Fuso Mitsubishi Canter Wiper Blades Size Guide

The Fuso Mitsubishi Canter is a light-duty truck produced by Mitsubishi Fuso Truck and Bus Corporation, a subsidiary of Daimler Truck. The Canter spans two distinct wiper blade fitments across its production run: the 1986-1996 generation takes an 18 inch (450mm) blade on both the driver and passenger sides, while the 1997-2023 generation takes a 20 inch (500mm) blade on both sides. Both generations use a J-Hook connector on the front wipers, and neither generation is fitted with a rear wiper. Find your vehicle year in the table below.

Truck (1986-1996)

Truck (1997-2023)

Frequently Asked Questions

What size wiper blades does a Fuso Mitsubishi Canter take?

The wiper blade size depends on the generation of Canter. The 1986-1996 Canter takes an 18 inch (450mm) blade on both the driver and passenger sides. The 1997-2023 Canter takes a 20 inch (500mm) blade on both sides. Both front blades are the same size within each generation, making it straightforward to replace the pair.

Does the Fuso Mitsubishi Canter have a rear wiper?

No, the Fuso Mitsubishi Canter does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Fuso Mitsubishi Canter use?

The Fuso Mitsubishi Canter uses a J-Hook connector on both front wiper arms across all model years. The J-Hook, also known as a hook-style connector, is one of the most common wiper arm fittings and is straightforward to install without tools. Replacement blades come with the J-Hook adaptor pre-installed.

Why did the Canter change wiper blade sizes between generations?

The 1997 Canter introduced a redesigned cab with a wider windscreen, which required longer 20 inch (500mm) blades compared to the 18 inch (450mm) blades fitted to the earlier 1986-1996 generation. Owners replacing blades on a pre-1997 Canter should confirm their build year before purchasing, as the two sizes are not interchangeable.

How often should I replace Fuso Mitsubishi Canter wiper blades?

Wiper blades on the Fuso Mitsubishi Canter should be replaced every 12 months as a general guide, or sooner if streaking, skipping, or reduced visibility is noticed. Trucks used in dusty or agricultural environments may see faster blade wear due to increased debris and grit on the windscreen. Inspecting both front blades at the same time ensures consistent performance across the windscreen.

Browse all Fuso Mitsubishi Canter wiper blades, return to the Fuso wiper blades page, or visit our wiper blades size guide for all makes and models.