The Bentley Arnage is a full size luxury sedan built by British manufacturer Bentley Motors, serving as the flagship saloon in the Bentley range until it was succeeded by the Mulsanne. The Arnage (1999-2013) takes a 24 inch (600mm) blade on both the driver side and the passenger side. Front wipers use a pin lock connector, and the model does not have a rear wiper, fitted with two front wiper blades only. Find your vehicle year in the table below.

Year Driver Side Passenger Side Buy and Save 50% Off RRP
1999 24" (600mm) 24" (600mm) Buy Now
2000 24" (600mm) 24" (600mm) Buy Now
2001 24" (600mm) 24" (600mm) Buy Now
2002 24" (600mm) 24" (600mm) Buy Now
2003 24" (600mm) 24" (600mm) Buy Now
2004 24" (600mm) 24" (600mm) Buy Now
2005 24" (600mm) 24" (600mm) Buy Now
2006 24" (600mm) 24" (600mm) Buy Now
2007 24" (600mm) 24" (600mm) Buy Now
2008 24" (600mm) 24" (600mm) Buy Now
2009 24" (600mm) 24" (600mm) Buy Now
2010 24" (600mm) 24" (600mm) Buy Now
2011 24" (600mm) 24" (600mm) Buy Now
2012 24" (600mm) 24" (600mm) Buy Now
2013 24" (600mm) 24" (600mm) Buy Now

Frequently Asked Questions

What size wiper blades does a Bentley Arnage take?

The Bentley Arnage takes a 24 inch (600mm) wiper blade on both the driver side and the passenger side across its full production run from 1999 to 2013. Both blades share the same length, so only one size needs to be ordered. The table above confirms this fitment for every model year.

Does the Bentley Arnage have a rear wiper?

No, the Bentley Arnage does not have a rear wiper blade. This model is fitted with two front wiper blades only, which can be confirmed in the specifications on the product page.

What wiper connector does the Bentley Arnage use?

The Bentley Arnage uses a pin lock front wiper connector. This adaptor type is common across Bentley models from this era, making replacement straightforward for most owners.

Why does the Bentley Arnage use the same size wiper blade on both sides?

The Bentley Arnage was designed with a symmetrical windscreen layout, allowing both the driver and passenger wiper blades to share the same 24 inch (600mm) length. This differs from most modern vehicles, where the passenger blade is shorter than the driver blade. Owners can therefore order a single blade size for both positions when replacing their wipers.

How often should I replace Bentley Arnage wiper blades?

Wiper blades on the Bentley Arnage should generally be replaced every 12 months to maintain clear visibility in wet conditions. Sun exposure in the Australian climate can accelerate rubber deterioration, so blades should be checked more often if streaking or noise develops. Replacing both blades together keeps wipe quality even across the windscreen.

Browse all Bentley Arnage wiper blades, return to the Bentley wiper blades page, or visit our wiper blades size guide for all makes and models.